Showing posts with label Sewing. Show all posts
Showing posts with label Sewing. Show all posts

Wednesday, July 6, 2011

Pacifier Clip Tutorial

Yes, I know, just like all of my other posts, it's been awhile. But before I head to the airport to go home, I thought I'd post something.  So for all of you making stuff for babies, here's tutorial for a pacifier clip or toy clip. I made 2 because they match the hooter hider I made. Also, Happy Birthday to Ryan James, who was born today! And congratulations to Katie, his mom!

Supplies:
1 Piece of fabric 3" x 9"
1 Mitten clip
7" of 5/8" Ribbon (Grosgrain works best)
Coordinating thread

Instructions:

Cut your fabric.

Turn right sides together and pin.  Fold down one end about 1/4". This makes it look nice after you turn it.

Sew three sides.  Leave the end you folded over open.  Trim the corners. 

Make sure you catch part of the fold so it doesn't come undone when you turn it.

Turn the tubes inside out and iron flat.

Take your ribbon and fold in half.  Sew into the opening.  Sew a tiny seam around the entire thing. I add a small stitch across the top right next to the ribbon just for security purposes (not shown).  The grosgrain ribbon works best for putting through pacifiers with tiny holes (soothies) but if you're using a pacifier with a loop, it doesn't matter what kind of ribbon you use.

Take your mitten clips and sew them on.  Make sure when you fold the end over the bottom of the clips are facing the part you're folding over.  I sew across and then up the 2 sides, following the other seams.

The top side.

Clip it on! You can also put this on toys or whatever so it doesn't fall on the ground.  You could also put a clip on each end so you can attach blankets and stuff to the stroller/carseat/kid...whatever you like!

 If you put clips on both ends you can attach a blanket or burp cloth to the carseat or a shirt.  This was very useful when I was walking through the airport w/ a burp cloth on my shoulder.  It inevitably slipped off my shoulder but didn't fall on the floor b/c of my double clip!

Tuesday, March 15, 2011

1/2 Apron Tutorial

I made this apron for a bridal shower over the weekend and it turned out pretty cute.  I love the fabric and wish I would have bought more. It's Amy Butler who pretty much always has awesome fabric.  I adjusted the tutorial from Stop Staring and Start Sewing.  My lovely model was rushing to go to the shower but took 4 seconds to take a pic for me! Thanks Cakes!

Supplies:
1 Fat Quarter of Fabric
1/2 yard of coordinating fabric

From your fat quarter cute a little bit off to make it 16" x 20" (you can use your whole fat quarter. I adjusted mine for the little person I was making this for).  Also cut 2 pieces of coordinating fabric 5" x 21" and 1 piece 5" x 22" (*).  Again, you can adjust the 5" if you want a larger tie and increase the length if you want it longer.

Sew the band together, end to end, right sides together so you make a really long strip.  Make sure you put the 5" x 22" piece in the middle. Press seams open.

Fold and press 3 sides in, leaving one long side undone.  I folded twice to create a nice edge. Sew in place.

  
With right sides together, sew the 2 pieces together and press the seam towards the band. I found out later that you should press towards the band, so the picture it wrong but I wanted to show the backside.

Next, fold down the top 1/4" but only the part that is above the main piece.  The straps do not need to be folded. Iron in place.

With right sides together, fold the straps on top of each other to and sew to create a tube. (check out the pic below for how to do the ends) DO NOT sew the part that you just folded down.  See in the picture? The part above the main fabric is open. Don't sew it!

When you get to the end, sew it diagonally. Then trim the excess.

Turn the tubes right side in. Fold down the top of the band and pin in place.  Top stitch around the entire band and you're done!



*My numbers for this are slightly off because I was in a hurry and didn't trim the selvage off. So, adjust accordingly.  The trouble comes when the sides of the main fabric piece are turned in to create an edge. It depends on how big you make your seam allowance. But if you're not in a hurry, think about it a little and it'll be right. I think i also would have made the straps a little longer for tying in front. It's probably fine if you're tying in back but I didn't try it.

Tuesday, February 22, 2011

Chopstick Carrier Tutorial

Did you know that in China alone they use about 45 billion pairs of chopsticks a year? I know how everyone always brings their own chopsticks to Asian restaurants and how they're always thinking, "How on Earth do I carry my chopsticks!?"  Well! I have an answer for you! The Chopstick Carrier! It's really easy to make. And I'm not saying I carry my own chopsticks around with me wherever I go (but I probably should and so should you) but now there's no excuse...except that I made this for my friend in Japan who really does carry her chopsticks around with her everywhere so I'd actually have to make myself one of these bad boys. Anywho, here it is.

Ingredients:
12" square of fabric
12" square of thin interfacing
22" ribbon
pair of chopsticks (or just 1)
fray check
Directions:
--Iron the interfacing onto the WRONG side of your fabric.
--Fold on the diagonal and pin.  Fold the ribbon in half and place the fold on the outside of the carrier and the rest of the ribbon inside.  Mark an opening as a reminder so you can flip this baby right side out.
--Clip the corners to reduce bulk after you flip it.
 I forgot to take pictures for the rest (sorry).
--Flip the carrier right side out.  Iron flat.  Sew a 1/8" seam around the top corner.  Do not sew a seam around the bottom edge.
--Fold in the corners according to the length of your chopstick(s). I folded my corners in 2.5".
--Sew a 1/8" seam on the bottom to tack the corners down.
--Use fray check to seal the ends of your ribbon.

Make yours today so you can bring your own chopsticks to your favorite Asian restaurant! And if you don't know how to use chopsticks, learn today. It's a very important noodle-eating skill. I mean really, how do you get the 1 cm noodle bits out of your bowl with a fork!?

Saturday, February 12, 2011

My Fantastic Purse!

I made this purse over the last week or so and I love it! I got the pattern from Warehouse Fabrics Inc. There were a few things I'd change on it if I made it again but just minor things.  I've never used piping before but I love the way it looks. It has a magnetic button (which was new to me also) that's really strong. But the best part is the fabric.  I absolutely LOVE the fabric.  It was hanging on my banister for a week and every time I walked by it I had to admire it.


It's nice an roomy, has pockets for my cell phone, iPod and 3 pens! Oh how I love it.

Sunday, January 30, 2011

The Scrappy Clutch

So I was asked by my Mother-In-Law to make a case for her newly acquired iPod Touch.  I dreamed up this  little number.  No mistakes, nicely sewn.


It totally fits the iPod and is great for when it's thrown in your purse and you don't want to damage the screen...or lose it in there. But, her iPod came with a silicone case which I tried to account for in my measurements but it was the first time I made this thing so it wasn't big enough.  So, I set out to make the Scrappy Clutch from "From an Igloo." I figured it'd fit the ipod (in it's grippy case) and all the cords and plugs that go with it. I thought it was super cute...until I tried to make it.  Ok, probably if I made it again I'd make it bigger (at least 2" on either side) and it'd go a lot smoother.  But I'm not going to be making it again anytime soon or else I'll gouge my eyes out with the seam ripper.  The problem lies in my sewing machine.  The free arm part of the machine is bigger and longer than the clutch. So sewing around the opening was challenging. I honestly stopped several times and took deep cleansing breaths.  And I did yell (not yell (no voice raised) but made it clear to leave me alone) at my husband. (Sorry, Dr. G Medical Examiner) But I had to finish the darn thing TODAY! Or else I'd have to deal with it tomorrow and I was totally done with it.  And here it is.


I don't know why the picture is sideways but I can't fix it. I'm sure it's just because I had such a hard time making it so why shouldn't I have a hard time blogging about it!?  It will fit all of the iPod stuff my Mother-In-Law has and it has a nice little strap (the only perfect part about the stupid thing) for comfort. The best part about it is IT'S DONE!  I was thankfully pulled out of my bad mood by watching The Proposal. If you've never seen it, watch it. Hilarious. Bound to cheer you up after a bad day of sewing. I made it. I didn't admire it. And now I'm giving it away. Forever......and going to finish my movie.